Skip to content
Monday, March 1, 2021

The Imp of the Perverse

Things I think I should be doing, for better or worse.

  • Home
You are here
  • Home
  • 2019
  • March

Month: March 2019

x0xb0x – Replacing Potentiometers

2019-03-172019-03-17 Laban
Replacing the potentiometers in a x0xb0x. Several of the potentiometers had some noise issues and they were possible to wiggle back and forth. We decided to replace all of the pots to have everything nice and fresh. I ordered the pots from Willzyx (http://willzyx.com) as it was easier and cheaper, mainly due to the shipping…
x0xb0xSoldering, x0xb0x2 Comments

Benq w1060 Projector – Changing Bulb and Light Path Cleaning

2019-03-102019-03-10 Laban
I have a Benq w1060 projector (which is about 8yrs old) which had severe issues with parts of the projected screen having lighter areas. It also projected light outside of the screen area. I decided switch out the light bulb as it was near the end-of-life accouring to the number of hours it had been…
UncategorizedLeave a comment

x0xb0x – Replacing buttons with Omron B3W-4050

2019-03-092019-03-17 Laban
The buttons in this x0xb0x had been worn out over the years. I replaced them with Omron B3W-4050 buttons. These buttons are a bit pricey (compared to No Name chinese ones) but they are sealed so dust and grime will not get into the buttons. Apparently the dirt is the main reason for the buttons…
x0xb0xOmron, repair, solder, Soldering, x0xb0x3 Comments

Recent Posts

  • Yamaha DX7 – Replacing All Buttons
  • Yamaha DX7 – Audio Output Jack Repair
  • Roland SH-101 – Power Switch Replacement
  • Korg Poly-61 – Battery Leak Repair
  • Roland TR-505 – Installation of HKA Design ROM Expansion

Recent Comments

  • Yamaha DX7 – Replacing All Buttons – The Imp of the Perverse on x0xb0x – Replacing buttons with Omron B3W-4050
  • Laban on Korg Poly-800 Mk1 – Replacing Battery & Restoring Presets
  • Laban on Building the Nava #1 – Soldering the Power Supply
  • Clint Milby on Korg Poly-800 Mk1 – Replacing Battery & Restoring Presets
  • Simon Tunnicliffe on Building the Nava #1 – Soldering the Power Supply

Archives

  • February 2021
  • January 2021
  • December 2020
  • October 2020
  • September 2020
  • August 2020
  • July 2020
  • June 2020
  • April 2020
  • February 2020
  • January 2020
  • November 2019
  • October 2019
  • September 2019
  • August 2019
  • July 2019
  • June 2019
  • May 2019
  • March 2019
  • June 2018
  • May 2018
  • February 2017
  • January 2017
  • December 2016
  • November 2016
  • October 2016
  • August 2016
  • July 2016
  • June 2016
  • May 2016

Categories

  • Korg Poly-61
  • Nava
  • OSX
  • PlayStation 4
  • Roland Jupiter-4
  • Roland SH-101
  • Roland TR-505
  • Roland TR-808
  • Uncategorized
  • Waldorf
  • x0xb0x
  • Yamaha DX11
  • Yamaha DX7
  • Yocto

Meta

  • Log in
  • Entries feed
  • Comments feed
  • WordPress.org

Lars Bjarby ©2021 - Contact: lars@bjarby.se